Use of lignocellulose leftovers in the elaboration of made up of wood-cement-sand

Article Sidebar

HTML (Español (España)) PDF (Español (España))
Published: Oct 31, 2017
Keywords:
waste, wood, portland cement, element.

Main Article Content

Jorge Luis García González
Universidad de Pinar del Río “Hermanos Saíz Montes de Oca”.

Abstract

The entire use of the wood like matter prevails it depends on the several phases of its productive chain. Consequently, it is necessary to study the process with the objective of knowing the aspects that should impact in a more direct way of avoiding that negative factors can continue reducing the credibility and acceptance of the product in the market. The mathematical models will be built that make possible to elevate the effectiveness and the quality of the sawed wooden production. The use of residuals of the forest and cement consolidate the production of constructive elements for houses of low cost, as well as tests of compatibility and mathematical modulation of the process of formation of the models, with the purpose of obtaining the technological parameters that make possible to reach a product with the possible bigger resistance. The objectives of this project refer to the development of methods and procedures that begin of the modeling one mathematical that allows to increase the use of thelignocelluloses residuals, the application of innovative techniques that you/they allow to increase the effectiveness and quality of the biomass of the forest, the popularization in the sector of the forest industry giving possibilities of new technologies associated with the destructive evaluation of the wood during the determination of their basic properties and, finally, to collaborate with the reduction of the pressure in the native forests that increase the use of the biomass of this.

Article Details

How to Cite
García González, J. L. (2017). Use of lignocellulose leftovers in the elaboration of made up of wood-cement-sand. Forestry and Environmental Sciences, 2(2), 181–189. Retrieved from https://cifam.upr.edu.cu/index.php/cifam/article/view/99
Issue
Vol. 2 No. 2 (2017): Julio-diciembre
Section
Scientific Original Article

As part of the submission process, authors are required to check off their submission meets all the elements listed below, and they know that shipments that do not meet these guidelines may be returned to the author.

DECLARATION OF ORIGINALITY

The author Authorship and author who refers or shipping to UPR CIFAM, CERTIFY:

  • That each of the people in it are listed as author or author has contributed directly to the intellectual content of the work, approves the contents of the manuscript is submitted to editorial process and gives its consent that their name appears on the authorship thereof.
  • That the request has not been previously published, it is not under review in another journal, nor included in another paper accepted for publication by another publisher.
  • That in the event that the content has been presented in a communication or congress, the current request is a substantial modification thereof and has properly been cited text on which it is based. This circumstance an explanation is provided to the publisher at the right place of the submission form (box "Comments to the Editor").
  • That each of the people listed as author or author agrees not to submit this work for consideration by another publication while in CIFAM Journal editorial process.
  • It has been recognized in a note the article, by way of thanks, the contribution of those which are not signatories to the same or responsible for the final version, have contributed substantially to the development of labor so and have given their permission to such mention.
  • Data and publications in which the information contained in the work, or who have had a significant influence on it is based have been cited in the text and in the list of references, being responsible, in respect of rights author refers, of any dispute or claim relating to intellectual property rights, exonerating from liability CIFAM journal.

Likewise, the author who submitted work must confirm compliance with the following points:

 Copyright Notice:

Authors who publish in this journal agree to the following terms:

  • The authors retain copyright, ensuring Journal CIFAM the right of first publication of the work that refer to the magazine to be submitted to the editorial process.
  • Authors know that his work is published under a Creative Commons License Attribution-NonCommercial 4.0 International that allows others to share it with a recognition of the authorship of the work and its initial publication in this journal.
  • The authors give to the CIFAM Journal the rights of exploitation of the work which has been published in this journal, authorizing the publishing of it for the exercise of a free reproduction, distribution and public communication without commercial purposes.
  • Authors know that their work will be stored on servers and reproduced in digital format for inclusion in institutional repositories and databases that will facilitate free access to the full text of the work.
  • Authors can distribute the version of the work published in CIFAM Journal (for example, to an institutional repository or publish it in a book), with an express acknowledgment of its initial publication in this journal.
Author Biography

Jorge Luis García González, Universidad de Pinar del Río “Hermanos Saíz Montes de Oca”.

Estudiante Ingeniería Forestal. Quinto año.

References

Álvarez D. “Análisis numérico para aumentar la eficacia de los aserraderos”. La revista Chapingo. Las Ciencias de Bosque de serie y Ambientales, 2002, 2, 76-95.

Álvarez, D, Betancourt, Y., González, I. Tecnología de la Madera. La Habana, Cuba: Editorial Felix Varela, 2013.

Álvarez, E. Algunos usos de los principales residuos madereros transformados (I). En: Residuos madereros, transformación y usos, 2005.

Basaure, P. Aserrín de madera, datos al compostar. [en línea]. Santiago, Chile, 23 octubre 2008 [Cosultado 16 septiembre 2016]. Disponible en: http://www.manualdelombricultura.com/foro/foro.pl.

Files, A. J. M. El uso de residuo de spp del pinus y materiales el cimentícios alternativo en la producción de bloques para la albañilería estructural. Tesis Doctoral inédita en las Ciencias del Bosque. Universidad Federal de Paraná, Curitiba, 2009.